Metal roofing projects need the right trim and accessories to finish the job. Panels cover the main roof or wall area, but trim protects edges, peaks, corners, transitions, and connection points.

Premium Metal Roofing Sheets carries common metal roofing accessories near Sacramento, including ridge cap, drip edge, edge trim, corner trim, C channel, J channel, and screws.

Current Accessory Prices

• Ridge cap, 10 ft: $30
• Drip edge, 10 ft: $25
• Edge trim, 10 ft: $25
• Corner 2×2 inch, 10 ft: $20
• C channel, 10 ft: $20
• J channel, 10 ft: $20
• Screws, 1 inch: $0.15 each
• Screws, 1 1/2 inch: $0.20 each

Ridge Cap

Ridge cap is used along the peak of a metal roof where two roof slopes meet. It helps cover the top joint and gives the roof a finished appearance.

Drip Edge and Edge Trim

Drip edge and edge trim help finish the roof perimeter and guide water away from edges. These pieces are important for cleaner installation and better long-term protection.

Corner, C Channel, and J Channel

Corner trim, C channel, and J channel are useful for siding, wall panels, edges, openings, and transitions. They help make corrugated panels look finished instead of raw at the edges.

Screws

Metal roofing screws are sold separately. Current listed prices are $0.15 each for 1 inch screws and $0.20 each for 1 1/2 inch screws.

FAQ

Do I need trim for a metal roof?

Most projects need trim for peaks, edges, corners, and transitions.

Do you sell screws?

Yes. 1 inch and 1 1/2 inch screws are available.

Can I buy accessories with the panels?

Yes. Call 916-940-5700 to confirm stock and quantities for panels, trim, and screws.

Need current stock or delivery options? Call 916-940-5700 with your city, color, length, and quantity.

Related: Metal roofing sheets in stock near Sacramento and metal roofing sheet prices in California.